In the block light experiment, F m values were highest after the light treatment. Therefore, the maximal F m , which was reached at the end of the dark

phase following the block light treatment, was used for NPQ calculations (Fig. 2). For the purpose of this article, block light treatment is referring LGK-974 to a dark to light transition, where the PF is constant during the light phase. Because F m in the dark was lower than at low PF (Fig. 3), NPQ calculations were based on maximal fluorescence measured during the light experiments using consecutive increasing PF. This coincided with F m ′ during lowest PF treatment (Fig. 3). Fig. 2 Representative fluorescence parameters measured by FRRF during a dark to light transition using a single irradiance intensity (‘block light treatment’) and darkness. a F′, F m ′ on the primary ordinate,

and NPQ on the secondary Y-axis; b σPSII (Sigma PSII) and maximal quantum yields as well as effective quantum yields during the irradiance treatment. The upward arrow indicates the start of the light period using a photon flux of 440 μmol photons m−2 s−1 (approx. 4 × growth light intensity) after dark incubation (1–2 h). The downward arrow indicates the end of the light treatment. An addition of 160 μM dissolved inorganic carbon aimed for detection of nutrient depletion (double arrowhead), which should not have occurred due to low cell densities in this experiment. Results were confirmed in two independent experiments Akt inhibitor Fig. 3 Representative fluorescence parameters measured by FRRF during consecutive increasing photon flux treatments (dark–light transient and following increases in photon flux, indicated by upward arrows) and darkness (downward arrow). a F′, F m ′ on the primary ordinate, and NPQ on the secondary Y-axis; b σPSII (Sigma PSII) and maximal quantum yields as well as effective quantum yield during the irradiance treatment. Photon fluxes were 50, 200, 340 and 470 μmol photons m−2 s−1. Results were confirmed in two independent experiments

77 K fluorescence and measurements in the presence of CCCP Cells were cultured in 500-ml conical glass flasks with a minimum of 200-ml head space at Obatoclax Mesylate (GX15-070) a constant PF of 100 μmol photons m−2 s−1 (Cool White light, Silvania fluorescent tubes) and a temperature of 18°C. Cells from the log-phase were harvested for the experiments. After washing in fresh F/2 pH 8.2 medium, cells were concentrated to a final density of 1 × 107 cells/ml and dark incubated for 1 h prior to exposure to a saturating PF (660 μmol photons m−2 s−1; measured using a spherical (4π) light sensor). This was carried out in an open chamber (8-ml cylindrical Perspex Rod Oxygraph, Hansatech, UK) to allow gas exchange while the sample was stirred.