In what follows, the Fermi energy is taken as the zero energy lev

In what follows, the Fermi energy is taken as the zero energy level, and all energies are written in units of γ 0. Results and discussion Unperturbed systems Let us begin the analysis by considering the effects of the geometrical confinement. In Figure 2, we present results of (a) Local density of sates (LDOS) and (b) conductance for a conductor composed of two A-GNRs of widths N d  = N u  = 5

connected to two leads of width N = 17 for different conductor lengths (L = 5, 10 and 20 unit cells). The most evident result is reflected in the LDOS curves at energies near the Fermi level. There are several ACP-196 chemical structure sharp states at defined energies, which increase in number and intensity as the conductor length L is increased. These states that appear in the energy range corresponding to the gap of a pristine N = 5 A-GNRs [24, 32] correspond to a constructive interference of the electron wavefunctions inside the heterostructure, which can travel forth and back generating stationary (well-like) states.

In this sense, the finite length of the central ribbons imposes an extra spatial confinement to electrons, mTOR inhibitor as analogy of what happens in open quantum dot systems [16, 17, 19, 33, 34]. Independently of their sharp line shape, these discrete levels behave as resonances in the system allowing the conduction of electrons at these energies, as it is shown in the corresponding conductance curves of Figure 2b. It is clear that as the conductor length is increased, the number of conductance peaks around the Fermi

level is also increased, tending to form a plateau of one quantum of conductance (G 0 = 2e 2/h) at this energy range. These conductance peaks could be modulated by the external perturbations, as we will show further in this work. Figure 2 LDOS and conductance for different geometries. (a) LDOS (black line) and (b) conductance of two A-GRNs (red line) of widths N d  = N u  = 5, connected to two leads of widths N = 17 for different conductor lengths: L = 5, 10, 20 u.c. (c) Conductance of a system composed of two parallel N d  = 5 and N u  = 7 A-GNRs of lengths L = 15. As a comparison, we have included the pristine cases (black and blue curves, respectively). At higher energies, the conductance plateaus appear CHIR 99021 each as 2G 0, which is explained by the definition of the transmission probability T(E) of an electron passing through the conductor. In these types of heterostructures, if the conductor is symmetric (N u  = N d ), the number of allowed transverse channels are duplicated; therefore, electrons can be conduced with the same probability through both finite ribbons. On the other hand, in Figure 2c, we present results of conductance for a conductor of length L = 15 and composed of two A-GNRs of widths N d  = 5 and N u  = 7, connected to two leads of widths N = 17. As a comparison, we have included the corresponding pristine cases.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>